How to Make a Sexy & Sparkly DIY Spider Web Costume for Halloween
![The DIY Designer](https://cdn-fastly.hometalk.com/media/profile/2020/07/25/4126609_2.jpg?size=91x91)
In this tutorial, I'll be sharing a spider web costume DIY perfect for Halloween! Making this spider web costume is pretty simple, and the best part is that it’s a no-sew. All you need is some bling, a glue gun, a corset top, and some mesh fabric.
Page down to see how I make this sexy homemade spider web costume that will leave you looking elegant yet playful.
Tools and materials:
- Black corset top
- Thin crystal trim
- Thick crystal trim
- Wire cutters
- Glue
- Syringe
- Brush
- Black paint
- Mesh top with rhinestones (optional)
1. Prep the glue
The first thing you’re going to do is fill up a precision syringe with your glue of choice. Fill about half of the syringe, as you’ll need less than you think.
2. Glue the thick crystal trim
Now, line the upper seam of your corset with glue.
Push the thick crystal trim down on the glue. The precision syringe is vital since it will spread evenly and not seep through the sides when you push down on the trim.
Continue doing this on the entire upper seam, as shown.
When you get to the curved edges of the corset, a thick trim is not flexible enough to bend around the edges, so doing it in two pieces is the trick.
3. Make the spider web
Now, it’s time to make the spider web design on the bust cups. You can eyeball it by drawing the design with a pencil. Then, glue down the pieces accordingly. Start by creating an even “X” shape.
For every piece you glue around the bottom half of the cup, cut the trim further down, so you have a lovely fringe effect. Also, you cannot overlap the crystal trim, so to form the other line for the “X” part, you’d have to cut the piece in half and stick accordingly, all around.
Next, anchor a long piece of crystal trim in between the triangles to create that cobweb effect. Here, you can overlap the trim on top of the diagonal pieces.
Here’s a closeup. Round each segment as you go along, and then glue the trim on top of the glue accordingly.
Let the crystal trim fall on the trim underneath so that you achieve a dangle effect. Work your way around the cup so that you have at least three sets of these.
Essentially, you need to anchor the points appropriately, and the finished result looks like this.
If there are overspills of glue, scrape off the glue with your fingernails and touch it up with some black fabric paint. Finish off the spider web costume by adding trim to the bottom edge.
4. Mesh top (optional)
I purchased this mesh top from a store, and it has some lovely rhinestones all over the fabric. I plan on wearing this underneath the corset top.
Spider web costume DIY tutorial
Here are the results! What do you think of this DIY spider web costume? I think it’s definitely put together, sexy, sultry, with plenty of dazzling jewels in all the right places.
Thank you for joining me on this spider web costume DIY tutorial, and I hope you have some awesome inspiration for your next Halloween DIY costume project. Have fun!
Enjoyed the project?
Suggested materials:
- Black corset top
- Thin crystal trim
- Thick crystal trim
- Wire cutters
- Glue
- Syringe
- Brush
- Black paint
- Mesh top with rhinestones (optional)
The author may collect a small share of sales from the links on this page.
Comments
Join the conversation